SUDZ-IT EV Utility Nozzle 

The patent-pending SUDZ-IT EV Nozzle is the first of its kind, designed to be slid under burning objects, to help cool them down and extinguish stubborn fires.

Nozzle Final_edited.png

The SUDZ-IT Utility Nozzle allows for water to be sprayed in even the tightest spaces. This low-profile nozzle is perfect for electric vehicles to spray an even coverage of water under the vehicle, give you less than 8 inches of clearance. It allows you to distribute the water evenly and exactly, where it is most effective to cool the vulnerable and inaccessible part of the vehicle, the battery pack.

Using the SUDZ-IT EV Utility Nozzle makes every precious drop of water count, and do its job – Cool and Extinguish. 

 

"The spray pattern has been engineered to cover a space of 8 ft by 16 ft at 8 inches high,  but allows a spray pattern covering 128 Square feet." 

The SUDZ-IT Utility Nozzle incorporates a set of skids, attached to the nozzle, to make placement easier and comes standard with 2 x 3-foot extension pipes fitted with a curtain nozzle, to help protect the fire fighters setting it in place.  Once in place, the nozzles allows Fire fighters to operate at a safe distance.

istockphoto-1300142481-612x612_edited.png

Ember Suds, Sentinel Purifier, SUDZ-IT, Sentinel IQ, Indoor Air Quality Monitoring, Post Fire Decon, Safety Suds Bunker Gear Detergent, Sentinel Suds EPA Rated Fabric Sanitizer, Needlepoint bipolar ionization, Needle Point Bi-polar Ionization, NPBI, CO continuous monitoring, tVOC continuous monitoring, PM 2.5 continuous monitoring, PM 10 continuous monitoring, co2 continuous monitoring, ion concentration continuous monitoring, Real-time continuous air quality monitoring, healthy cab, clean cab, NFPA 1851 preliminary exposure reduction, wet mitigation, activated charcoal soap with pumice, solid surfactant block, mop up, overhaul, #guardingtheairyoubreathe, #sudzit, #thesentinelpurifier, #innovationengineeredfortradition, #sentineliq, 
 

SPECIFICATIONS

SUDZ-IT Utility Nozzle:

• 12” Long x 9” Wide x 2 ½” High, - Weight 4 Pounds
• EV nozzle is flow is adjustable from 60 GPM up to 150 GPM at 100 PSI.  (at the time of Manufacture)
• Factory base flow is 60 GPM at the nozzle.



Extension Tubes:

1 x 40” Long x 8” Wide (at the skid) x 6” high (at the fan nozzle)  -  Weight 6 Pounds

• 1 x 40” long x 1.5” wide x 1.5” High  -  Weight 4 pounds​

.

Nozzle New.png

The SUDZ-IT EV Utility Nozzle can be used in the following applications:

• Electric Vehicle fires
• Scooter battery fires
• Traditional engine fires
• Pallet fires
• Cooling LP tanks
• As a decon nozzle
• As a decon shower head
• Over hauling furniture
• Wetting a fire break
• Overhauling tight areas