Extractors & Dryers
The first extractor package on the market to offer out of the box pre-programmed NFPA 1851 Compliance
-
30lb, 40lb, 62lb Soft Mount PPE Extractors and Base
-
Pre-wired two-pump chemical injector and hose package
-
5 Gallon Pail of Safety Suds Bunker Gear Detergent
-
5 Gallon Pail of BacStop OPL EPA Rated Fabric Sanitizer
PACKAGE INCLDES
PRE-PROGRAMMED TO MEET NFPA 1851 REQUIREMENTS
The first extractor package on the market to offer out of the box preprogrammed NFPA 1851 Compliance
PRE-WIRED TWO PUMP
CHEMICAL INJECTION SYSTEM
The latest edition requirements of
NFPA 1851 require more than using
detergent. Each solution comes
standard with a two-pump injection
system so both detergent and
sanitizer can be automated
ISP PROVEN DETERGENT
AND SANITIZER
Safety Suds Bunker Gear Detergent
is used by ISP’s and major metro
fire departments across the US.
BacStop OPL is an EPA rated fabric
sanitizer that leaves a bacteriostatic
finish that can last for up to 6
months
AVAILABLE IN
30
lb
MODEL:
EXT-30
40
lb
MODEL:
EXT-40
62
lb
MODEL:
EXT-62
AIR DRYING CABINETS
Toxic Suppression’s Forced Air Drying Cabinets are designed to meet the specific needs of the fire service. These custom-built drying cabinets meet the NFPA 1851:2020 Edition standard and will allow for gear to be put back into service within an average of 60 minutes. The Forced Air Drying Cabinet utilizes advanced fan technology designed to force 460 CFM (cubic feet per minute) of warm air throughout the 64 cubic foot giving you over 400 air turns an hour. Temperature regulated to never exceed the NFPA 1851 threshold of 105 degrees F.
The Forced Air Drying Cabinet is designed to maximize airflow though hollow hangers inside your boots, gloves, hoods, and bunker gear combined with airflow around the outside of your PPE for quickest, most uniform drying possible. With the Toxic Suppression Forced Air Drying Cabinets you will never be left with damp gear.
TOXIC SUPPRESSION’S FORCED AIR DRYING CABINET IS THE BEST CHOICE TO GET YOUR TOXIC CLEANED BUNKER GEAR BACK IN TO SERVICE.
6-Gear Features:
(4) Forced Air coat hangers,
(1) glove rack (that hold 13 gloves)
(2) Forced Air boot hangers (each holds 3 boots)
∙ Conforms to NFPA 1851 guidelines
∙ 5 selectable temperature settings including air only
∙ Optional hangers for boots and gloves, and shelves for hoses
∙ Built-in floor drain to remove water drip off
∙ Flush mounted lockable slam latch
∙ Energy efficient 6kW heating element
∙ Operates on standard 240V single phase 40 amp service
∙ 2-year limited warranty
also available in 2-gear option